Classeq Hydro 500 Under Counter Dishwasher Dish Washer Gravity Drain 400mm Rack

400mm square basket model, 3 minute wash cycle, chemical dispensers & filter system as standard
Tab 1 Tab 2
Specifications

Product Type Front Loading Dishwashers
Range HYDRO
Model Number model 4
Order code H508
Dimensions 450(W) x 550(D) x 750(H)mm
Rack Size 400 x 400mm
Electrical loading 2.75kW - 13 amp
Cycle time 3 minute
Chemical Dispensers Yes - Both rinse & detergent
Drain Pump Optional - Product code H506P
Air gap / Air break Type B - For type AB see model Duo 508
Booster Pump Optional



Width 450 mm
Depth 550 mm
Depth - Door open 870 mm
Height 750 mm
Rack size Square 400 mm
Maximum plates per rack 9
Door opening height 330 mm
Maximum component height 315 mm
Operating level <70 db
Weight - Net/Gross 35/40 kg
Rinse booster pump Optional
Built in detergent dispenser Yes
Built in rinse aid dispenser Yes
Double skinned door Yes
Double skinned cabinet No
Maximum racks per hour - water @ 50°C 20
Cycle Times 3 min
Water connection - BSP 3/4''
Water inlet height from floor level 40 mm
Required water pressure 2 bar
Required water flow 8 Ltrs/min
Drain type Pumped
Drain size 22 mm
Operating voltage 220/50/1 - Yes, 400/50/3 - No
Amps required - 1 Phase - Water fed @ 40°C 13 Amps
Amps required - 1 Phase - Water fed @ 10°C 13 Amps
Total connected load - Water fed @ 40°C 2.75 kW
Total connected load - Water fed @ 10°C 2.75 kW
Temperature interlock Yes (can be removed)
Quick start mode Yes
Wash tank heating 2.0 kW
Rinse boiler heating - Water fed @ 40°C 2.0 kW
Rinse boiler heating - Water fed @ 10°C 2.0 kW
Wash pump size 0.22 kW
Wash pump capacity 220 Ltrs/min
Wash tank capacity 10 Ltrs
Wash tank operating temperature 55°C
Rinse boiler capacity 6.5 Ltrs
Rinse boiler operating temperature 85°C
Rinse water consumption @ 2 bar 2.5 Ltrs
Max/Min stand pipe height from floor 650mm/350mm
Max/Min water pressure 6 bar / 1 bar
Minimum water flow 8 Ltrs